View customer
comments
FlashZebra.com FlashZebra.com

OPTICAL SLAVES:

flash Optical Slaves flash

The optical slaves described below will immediately fire a connected flash unit when another flash burst is detected, allowing a remote flash to be fired without any connecting wires. They require no batteries or other power and run off the flash unit to which they are connected.


Item #0140 — Optical Slave — Extended Range Version — with Vivitar Connector — Sonia Brand

This optical slave is for the Vivitar 285HV, 285 and 283 flash units, and also works with the Minolta 360PX and 320X flash units.

MORE ABOUT THIS ITEM...


Item #0118 — Optical Slave — Canon EX Compatible — with Male PC Connector — Sonia Brand

This optical slave will work with all Canon EX flash units.

MORE ABOUT THIS ITEM...


flash New! flash Item #0272 — Optical Slave - Screwlock PC - 18 inch cord - Canon EX Compatible - Sonia Brand

This optical slave will function with most flash units that accept a screwlock PC connector including Nikon SB and Canon EX.

MORE ABOUT THIS ITEM...


Item #0127 — Optical Slave — Canon EX Compatible — with mono miniphone plug — Sonia Brand

This optical slave will work with all Canon EX flash units and utilizes the very reliable miniphone sync connector.

MORE ABOUT THIS ITEM...


flash New! flash Item #0274 — Optical Slave - Miniphone Plug (3.5mm) - 18 inch cord - Canon EX Compatible - Sonia Brand

This optical slave works with most flash units that accept a miniphone plug (3.5 mm) sync connector and Canon EX flash units with a miniphone hotshoe adapter.

MORE ABOUT THIS ITEM...


Item #0050 — Optical Slave — Extended Range Version — with Female PC Connector — Sonia Brand

An extended range optical slave that works with most flash units except the Canon EX flash units.

MORE ABOUT THIS ITEM...


Item #0003 — Optical Slave Flash Trigger with Female PC Sync Connector — Sonia Brand

This optical slave works with most flash units except the Canon EX flash units.

MORE ABOUT THIS ITEM...


flash New! flash Item #0256 — Optical Slave – Extended Range Version – with HH Sync Connector – Sonia Brand

This optical slave works with flash units that use the HH connector.

MORE ABOUT THIS ITEM...


flash New! flash Item #0261 — Optical Slave - Extended Range Version - with Sunpak Connector - Sonia Brand

This optical slave has the proprietary Sunpak connector and pushes directly into the sync port of several Sunpak flash units, including the Sunpak 383, 333, 522, 544 & STD-1D flash foot.

MORE ABOUT THIS ITEM...


Item #0129 — Optical Slave — In Hotshoe Mount

This optical slave is packaged in a convenient hotshoe, and will immediately fire a connected flash unit when another flash burst is detected.

MORE ABOUT THIS ITEM...


Item #0100 — Optical Slave — Extended Range Version — with Male PC Connector — Sonia Brand

This optical slave works with flash units with a built in female PC sync connector such as the Nikon SB-24⁄25⁄27⁄28⁄28DX & the Canon 580EXII, and FlashZebra.Com Hotshoe Adapters #0064 & #0065. The optical slave pushes directly into the sync port; no cord is required.

MORE ABOUT THIS ITEM...


Item #0136 — Optical Slave in Hotshoe for Sony ⁄ Minolta Flash

This optical slave is packaged in a convenient hotshoe that will accept the proprietary, non-ISO hotshoe found on recent Sony and Minolta flash units.

MORE ABOUT THIS ITEM...


Item #0073 — Optical Slave — Extended Range Version — with mono miniphone plug — Sonia Brand

This optical slave will work with most flash units that accomodate a miniphone plug (3.5 mm) at the sync port (or a connecting cord must be used), but it will NOT work with the Canon EX flash units.

MORE ABOUT THIS ITEM...


Item #0076 — Mono F⁄F Miniphone Coupler

This is a Mono miniphone coupler with a miniphone jack (female) on both ends.  It can be used to connect Item #0073 shown above to a Pocket Wizard ⁄ Skyport adapter cable.

MORE ABOUT THIS ITEM...