This hotshoe adapter can be used with either the Radio Popper JrX "Basic" receiver or the Radio Popper JrX "Studio" receiver and several popular Nikon SB flash units.
Please read the ad copy carefully to understand the exact capability of this device.
Note the functional capability is different depending on which version of the Radio Popper JrX receiver used ("Basic" or "Studio").
Capabilities when used with the "Basic" JrX receiver:
-
Provides basic sync but no remote power level control from the JrX transmitter.
-
Flash must be set to manual mode and the desired power level set on the flash unit.
-
Works with SB-24, SB-25, SB-26, SB-27, SB-28, SB-28DX, SB-80DX, SB-600, SB-800 and SB-900.
Capabilities when used with the "Studio" JrX receiver:
-
Provides sync.
-
Provides remote power level control set from the JrX transmitter.
-
For remote power control the flash must be set to TTL mode.
-
Works with SB-24, SB-25, SB-26, SB-27, SB-28, SB-28DX, SB-80DX, SB-600, and SB-800.
-
Remote power control is not possible with the Nikon SB-900, but the "Studio" vision of the JrX receiver can function in basic flash set manual mode with the SB-900, as described above.
Other features:
-
No additional cords needed. Just plug the integrated cord directly into the JrX receiver.
-
Frees up PC sync port so external power packs can be used
-
Hole for flash foot locking pin
-
1 ⁄ 4" - 20 screw hole with metal insert on hotshoe bottom for attachment to popular umbrella adapters, tripods, etc. (See inset)
-
Flash shoe rail for mounting
-
Reliable right angle miniphone sync connector
-
Heavy duty 3.8mm cord - approximately 13 inches long (35 cm.)
-
Cord strain relief at hotshoe
Price: $24.50 + shipping
